How to Replace a Saab 9-3 Key
The Saab 9-3 has a great attraction for drivers. It is well-lit and has an efficient engine. It has a high safety rating.
It is vital to have two keys that work for your vehicle. It could be costly to replace a key if you lose it.
How to Replace the Ignition Key on the Saab 9-3
If the car key won't start in the ignition you must replace it. This guide will guide you through the steps to do it on the Saab 9-3. You'll need to replace the key, get a new reprogrammable cell, and purchase a new case for your key-fob.
Most modern Saab models make use of transponders instead of a metal key to unlock the car and start it. The issue with this is that the reprogrammable battery on the key-fob can wear out and not hold a charge any longer. This is particularly relevant if you continue to use the same key on the same lock.
A professional locksmith can replace the battery fairly easily. If you have the proper tools and patience, you can do it yourself. The first step is to disassemble the key-fob from its case. Insert flatheads into the slot in the middle of your case. You must be careful, as the plastic is extremely thin and is susceptible to damage.
After the case has been opened, you can make the new key by combining lower part of the old key with a transponder and banana. This will ensure that the new key is correctly paired to your CIM that can make a big difference when replacing the sole keys for your Saab 9-3.
How to replace the ignition Key in a Saab 900
Unless you have two keys, you'll have to take off the dashboard and steering wheel in order to access the ignition. Begin by disconnecting the negative battery cable. Once the battery is disconnected, it is possible to remove the dashboard and trim pieces around the steering wheel. Once the dash has been removed, you can place screws into the hole behind the ignition switch.
The ignition cylinder is fitted with a key lock which can stop the vehicle from starting if it doesn't have a key. If the ignition switch on your 900 isn't working properly, check if the key is in the lock or stuck within the ignition barrel. You should also rotate your keys and keep them clean to avoid being bent.
Saab cars differ from other cars in that they don't have traditional keys made of metal. Instead, the car can recognize the electric signals of the key fob by a specific chip inside it.
If you lose just one key fob that is working, your dealer will charge a premium to replace your computer module (also called the CIM). We can however reprogram your computer's EEPROM, and then prepare it to accept new keys without replacing it. This will save you over 50% of the price the dealer charges! This is the SAAB KEY PROGRAM. Find out more about it here!
How to Replace the Ignition Key in the Saab9-5
The metal portion of a classic Saab key is easy to copy, and is also not much of a deterrent against theft of vehicles. The electronic portion of the key-fob comes with an electronic chip that detects the car when the key is inserted into the ignition switch.
Saab has relied on the technology of this anti-theft device for more than 10 years. It's not as efficient as a physical door lock but it does make stealing your car a lot more difficult. Every Saab owner should keep a spare Saab key in their vehicle.
The majority of new Saabs are delivered with two keys, but they can be added by the dealer's expense using a handheld device known as a Tech-2. The cost can be under $400 for the transmitter+transponder (different than the metal key blade/shell that opens the doors and turns the ignition cylinder). The only exception to this rule is the NG 9-3 vehicles with more modern, more advanced features that require a key-fob.
The dealer will replace the CIM or TWICE module of those cars if all keys are lost, and they'll cost you top dollar for the process. However, we can reprogram the EEPROM in your existing computer and set it up to accept new keys without replacing the expensive modules.
How to Replace the Ignition Key on the Saab XC90
It's possible to replace your SAAB key fob if you're experiencing difficulty turning the lock barrel. Fortunately, the process is quite simple and doesn't require you to visit an agent. You can complete the process at home using a few simple tools.
First, you'll need prepare the new key. Before you begin, ensure that the anti-theft system has been disabled by placing blocks on the rear wheels, and then adjusting the handbrake. Next, insert the key into the ignition and turn it to the ON position that activates the accessories, but does not start the engine. Repeat this process five times and leave the key in the on position.
saab 9-3 key fob programming 'll then have to buy an additional case for your key fob. These are available at most auto parts stores and are usually very affordable. You can buy them without electronics, based on the model.
To open the case simply push the screwdriver with a flathead into the slot in the middle. After you have split the case, you will have access to all of the internal electronic components. To remove the electronics, use a small screwdriver, and try to pry them out with a gentle force.